Tuesday, June 29, 2010

AA/ DST Spotlight- Commander Uhura
(Star Trek II The Wrath Of Khan)

Photobucket

Figure Name: Commander Uhura
Manufacturer: Diamond Select Toys

Photobucket

Uhura was released carded as a Previews Exclusive to coincide with the third wave of DST's "Star Trek II The Wrath Of Khan" figures.

Photobucket

The Rundown: I really need to improve my organization skills when it comes to these spotlights- I'm having trouble remembering which figures I have covered and which ones I haven't! I had to take my ipod touch with me down to the basement last night and search my blog as I looked at my TWOK shelf to determine which ones I hadn't done yet! Turns out I'd left out Uhura... so here she is! Let's take a look!

Photobucket

Uhura uses the same body we saw on the Lt. Saavik figure. I said it back during her spotlight, and I'll say it again here- It's pretty obvious this body was sculpted more with an eye towards producing Saavik, and Uhura just happened to be a bonus. The body proportions are a bit off for Uhura. It's not so bad that it's unforgivable, but it would have been nice to at least get a unique torso sculpt here.

Photobucket

The body itself is nicely articulated and can pull off a variety of poses. The hips are hindered a bit by the lower edge of the tunic, but thankfully it's made of a rubbery material so there is at least some movement. Just like Saavik, however, Uhura seems to have one foot that sits lower than the other, causing her to always lean or fall over. I actually have to put a bit of sticky-tack on her feet to keep her upright. Watch out when sitting her on a high shelf because she will probably take a dive over time!

Photobucket

I am on the fence with this head. In some angles, I see Uhura... at other angles I see Louise from "The Jeffersons". I think it's the nose. They didn't quite capture her nose right. At least they got the hair pretty dead-on though...

Photobucket

Gotta love that late 70's/ early 80's big hair...

Photobucket

Accessories: Uhura includes an extra hand, a communicator, and a phaser. Pretty standard stuff...

Photobucket

Do you really need me to sell you on this one? If you're building a TWOK display, you need Uhura. Duh. Every TOS crew display needs the big 7! While I wish the figure was a bit better, this is the ONLY TWOK style Uhura ever made... so you're stuck with it if you go TWOK. She ain't that bad though, and can still be had on the cheap if you look around a bit.

-James

Thursday, June 10, 2010

Star Trek 'Potpourri' Spotlight-
Marshmallow Dispenser

Photobucket

Item Name: Star Trek V Marshmallow Dispenser
Manufacturer: Kraft Foods

The Rundown: Today we take a look at another product glimpsed in the awesome documentary "Trekkies".... the Marshmallow Dispenser! Here's the scene that inspired this spotlight choice:



Awesome. That dude even kept the marshmallows. Since he kep his "mint in a bag", I went ahead and ripped mine open to give you a better look...

Photobucket

Kraft did a pretty decent job of capturing the look of the dispenser seen in the film. Oh, what's that you say? You don't remember what the film version looks like? Well take it away Spock!



So although you don't get a great view of it, the Kraft version does appear to mirror it well. Kraft did a spruce it up a bit with a large colorful label on top. One side has the Star Trek V logo-

Photobucket

And the other labels what the strange device is used for-

Photobucket

Maybe it's just me, but the coloring and design of the label always reminded me more of something promoting Star Trek TMP rather than Star Trek V. Is it just me? Anybody else? Hello?

Photobucket

In the film, the dispenser most likely uses replicator technology on a small scale to create the marshmallows (or marshmelons as Spock would say). Since we don't have this technology (yet), Kraft had to come up with a different way of doing it. You load this puppy up with some jumbo marshmallows and then slide the gated end closed...

Photobucket

...then as you slide it open again, the marshmallows are pushed out of the opening by a little panel inside the dispenser. Way cool! Alas, I didn't have any jumbo marshmallows to show you guys what it looks like, nor did I really want a sticky dispenser mess on my hands.

Photobucket

Also included with your dispenser are a plastic fork and spoon. I don't know about you, but I don't usually eat my toasted marshmelons with a fork and spoon. One can only assume these were included to make this an "all-in-one" camping set.

Photobucket

The fork and spoon can attach to the dispenser using the large blue clip inserted on the end. You can also use this clip to attach the whole rig onto your belt loop. Because nothing says "expert camper" like a guy with a marshmallow dispenser hanging from his pants.

Photobucket

So there ya go... the second half of the Trekkies-inspired spotlights. The dispenser also included a certificate "signed" by Kirk, but I left that at home so you'll have to wait for me to get around to scanning and adding it to this entry. The real question is...do you need this? Nah, probably not.... but it is one of the crazier licensed Trek products to get released so it might be worth grabbing as a novelty.

-James



Tuesday, June 8, 2010

Playmates Spotlight-
Klingon Disruptor
("Star Trek Generations")

Photobucket

Item Name: Klingon Disruptor
Manufacturer: Playmates Toys

Photobucket

Playmates released this weapon of mass destruction as part of it's "Star Trek Generations" line.

The Rundown: Sorry for the lack in posts lately. I promise to be a better blogger! Believe me? Well, you should. Anyways... Did you ever wonder how I pick the items that I choose to spotlight here? Probably not, but I'm going to tell you anyway. Sometimes it is by request, but usually the item is picked based on whatever is easily grabbed from my Trek room at home (yes, I have a Trek room). The next couple of spotlights, however, stem directly from me watching the great film "Trekkies" again the other day. I decided it might be fun to choose a couple of items spotlighted in the movie. First up...



You're damn right kid! No Klingon would use a silly thing like a stun setting! But Playmates had other ideas, and decided to include one in this great little piece of roleplaying fun!

Photobucket

Overall, the disruptor looks pretty darned nice, especially for a kid's toy. The color choices look okay to me, but I wish they'd have chosen a different material for the grip. It seems a little too slick and glossy to have been the sidearm of one of them Klingon bastards...

Photobucket

The front end emitter is cast in a red translucent plastic to facilitate the light-up feature. The light is nice and bright when lit, but is pretty tough to capture in a photo (thus why there isn't one).

Photobucket

Playmates included a few stickers to slap on this piece to give it a little more detail. I've always dug the Klingon insignia, so it's nice to see it included here.

Photobucket

As our young friend pointed out in the video, the disruptor has 2 settings- "Disrupt" and "Stun". Even though he displayed them pretty well in the video already, I went ahead and made another in case you couldn't make them out (the first effect is "Disrupt").



And here's the bio from the back of the box-

Photobucket

...and the included "blueprints"!

Photobucket

While it's fun toy, those of you who strive for screen accuracy may just want to wait for the Diamond Select Toys version (if it ever makes it out). Folks like me with kids though should definitely give this one some thought, as it's pretty cheap and fits perfectly in a toddler-sized hand. My sons love having weapons for the opposing forces during their mock battles...

-James

Tuesday, May 11, 2010

AA/ DST Spotlight-
Sick Bay Dr. McCoy
& Nurse Chapel
Star Trek Minimates

Photobucket

Figure Names: Sick Bay Dr. McCoy & Nurse Chapel
Manufacturer: Diamond Select Toys

Photobucket

Bones & Chapel were released as part of Diamond Select's fourth wave of Star Trek Minimates.

Photobucket

The Rundown: It's Minimate Madness Monday! Oh wait... it's Tuesday. It's Tiny TOS Tots Tuesday! Today we'll take a look at the fourth wave release of the good doctor (sporting some short sleeve action) and his helpful nurse Chapel!

Photobucket

Let's start with McCoy- Since they'd already done a standard McCoy, doing the short sleeve version makes sense. The execution is nice, with DST even paying attention to the changes in the collar area.

Photobucket

The minimate McCoy head is really nice, perfectly capturing the look of Bones in this style. It's sometimes tough to make these likenesses work, but you can plainly see who this one is meant to be. Oh, and check out the arm hair! Some fans complain that they went a little overboard on the hair, but go back and watch some of those original episodes and you can see that Mr. Kelley had him some furry forearms!

Photobucket

Next up, we have Nurse Chapel. Right now, this is the only DST-produced Chapel figure made. That to me is just nonsense. Why a character like Chapel never made it into the regular figure line is just ludicrous. But I digress...

Photobucket

Chapel is pretty much your standard fare, with nothing to really write home about here. The hair sculpt is nice, and the outfit is well-painted, but the likeness isn't distinct at all. It seems to be a little harder for DST to capture female likenesses over male ones, what with the lack of lines in the face to give them "character". Still, it's Chapel so if you are collecting the MM line, she's a necessary pick-up.

Photobucket

Accessories: This set is pretty loaded, with 2 tricorders, 2 communicators, and a padd! I'm especially fond of the tricorder, though it does fall off the figure a little too easily.

Photobucket

If you're not a fan of the minimate style, there's probably nothing I can say to entice you to buy this one. The figures are fun, and make for cool additions to any work desk, but if you are just starting out, there are other "cooler" sets that make more sense as an initial buy. If you have already started in on the line though, this one's a solid purchase even if you already own McCoy, due to the amount of accessories and the fact that you get Chapel. One can never have enough Chapel figures!

-James

Wednesday, April 28, 2010

Reading Room Spotlight-
"Star Trek- Devil World"
By Gordon Eklund

I'm trying to get back on track with my Trek book reading, so last week I randomly grabbed one off the shelving unit to peruse- "Devil World", by Gordon Eklund...

Photobucket

As with most novels, the back of the book gives you a brief rundown of what to expect when you read this; Spock has to beam back aboard the Enterprise in a state of severe shock, a man named Jacob Kell may be his only hope, a mysterious force rules the planet, and all but one of the planet's original 100 colonists are completely insane. Sounds like a pretty straight forward plot, right? Well, the Spock bit is pretty minor in the actual novel, and he's relegated to almost a "guest star" status. There's also no mention of Gilla Dupree, the female lead in the story. She's the one that gets the action started by convincing Kirk to head to the quarantined planet to aid her in a search for her missing father, Jacob Kell. Also absent from the brief synopsis are the planet inhabitants, the Danons, a race of aliens that resemble devils.

The book flows pretty strongly for awhile, with Kirk getting to know Gilla, the explanations as to why Kell went to the planet, and the introduction of the Danons as highlights. But just when things start to get interesting, you're almost at the end of the novel and everything gets wrapped up a little too quickly and easily for my tastes. The book is short at only 153 pages, and I think the ending could have really benefited with the addition of another 50 pages or so to really pad it up a bit. Oh, there's also a subplot with Kirk being saddled with an annoying steward that I could have totally done without.

This is one that I could only recommend reading if you get it dirt cheap and you have an afternoon of boredom that needs filling. The rushed ending reminds of a Coen brothers film, where I'm really into the movie for the majority of the run... but then everything gets rapidly sewn together in the last 10 minutes and leaves me with a bad taste in my mouth.

-James

Tuesday, April 27, 2010

AA/ DST Spotlight- Doctor McCoy
(Star Trek II The Wrath Of Khan)

Photobucket

Figure Name: Doctor McCoy
Manufacturer: Diamond Select Toys

Photobucket

Bones was released as part of the second wave of "Star Trek II The Wrath Of Khan" figures. The entire wave was comprised of retailer exclusives launched at San Diego Comic-Con. McCoy was the New Force Comics entry.

Photobucket

The Rundown: He's the one they call Dr. Feelgood...He's the one that makes ya feel alright! Ah, what Trek line would be complete without the good doctor? NONE! McCoy here is a "must-have" character if there ever was one... So how's he look in TWOK style? Let's take a peek!

Photobucket

Released as part of the SDCC exclusive TWOK set, McCoy was definitely the most integral character of the bunch. Ask anyone on the street to name 3 classic Trek characters, and it's a good bet they'll say something like "Kirk, Spock, and ummm... the doctor guy?". That's why seeing him in the SDCC wave was a bit of a surprise over somebody like, say, Saavik or Uhura. The wave ended up being easier to acquire than I first feared though, so if you wanted McCoy it wasn't too much of a hassle. In fact, New Force had him in stock for at least months after his release if I recall correctly...

Photobucket

Just like the other TWOK figures, there's some parts reuse going on here. I've said it before and I'll say it again- I have no problem with reused parts on figures when it makes sense, and in the case of similar uniforms and body types... it makes sense.

Photobucket

Across the board, the paint work on my all my TWOK figures is pretty solid. McCoy is no exception, with clean lines all around and no major messy spots visible. The detailing is especially nice and really shows the effort that went into this line during it's heyday.

Photobucket

The TWOK figures have some of the best articulation amongst AA/ DST's catalog in my opinion. Of particular note is the nice "ball-and-socket" joint on the shoulder, which looks great and offers a nice range of movement. They also made the lower piece of the tunic in a rubbery material as to not restrict the hip movement too much. Nice!

Photobucket

Accessories: If I have one gripe on Bones, it's with the choice of accessories. McCoy includes a medical tool, 2 extra hands, a communicator, and a bottle of Romulan Ale (which I didn't even realize was a bottle of Romulan Ale since it's painted silver...). I would have loved for him to include a phaser or a tricorder... but what can you do?

Photobucket

C'mon folks... this one's a no-brainer. If you are collecting the TWOK line, you HAVE to own McCoy. Who else is gonna discover all those dead bodies on the Regula 1 Space Station? Who else is gonna bring Kirk some medicinal Romulan Ale? Who else is gonna "remember"? Nobody, that's who! So go buy him if you don't already own him! New Force doesn't look to have it in stock anymore, but if you look around enough you can find a deal. True, I have seen it go as high as $60, but I've also seen it go as low as a penny! Wish I'd have seen that one...

-James

Friday, April 23, 2010

Star Trek 'Potpourri' Spotlight-
Shuttlecraft Derby Car

Photobucket

Item Name: Galileo Shuttlecraft Derby Car
Manufacturer: Uh... me?
(Special thanks to my wife Bobbi for doing the picture duties on this one!)

Photobucket

The Rundown: I know it's not really merchandise... but I was pretty happy with how this turned out and thought I'd share this with you guys. My oldest son Blaze is now in the Awana group at church. Every year, they hold an "Awana Grand Prix" derby car race...

Photobucket

Each participant is given a block of wood, 4 axles, 4 wheels, and a set of instructions listing weight and height restrictions. You can pretty much make the car look like whatever you want, as long as it fits into the guidelines listed.

Photobucket

The minute I saw that block of wood, all I could think of was "Shuttlecraft". Blaze and I both love Trek, and since we knew we probably weren't going to win in the speed category (since we were going up against guys that had been making derby cars for an average of 10 years), we decided to make ours into something that would make a really cool display piece after the race ended.

Photobucket

I started off by cutting and sanding the basic shape into the block of wood. I'm no derby car engineer, but I knew enough to put more of the weight in front than in back so that the car is pulled down the lane a bit faster.

Photobucket

Next, I added wings and warp nacelles using balsa wood and a small wooden rod. I sculpted the nacelle caps out of model magic clay. The derby car can't exceed a certain size, so you have to make the wings and nacelles small enough to stay within the width the wheels.

Photobucket

To add to the craft's authenticity, I scanned a sticker sheet from both the Playmates Shuttlecraft toy and an AMT model kit. I resized the images in photoshop and then hoofed it over to kinko's to get a decal sheet made from the image. The nacelle stickers in particular were really hard to cut and place, since they are only about as wide as fingernail.

Photobucket

Look at it go! While Blaze placed 4th in this heat, he also grabbed second and third in the other heats. In a race where many cars didn't even make it to the finish line, our little shuttlecraft made it all the way down in each of it's times down the track. We didn't win any awards, but I think we came home with the coolest car. ;)

Oh! Real quick note- The site clicked over the 100,000 hit mark last night! It's only been about a year since I started this, so for me that's a huge landmark! Thanks for reading everybody!

-James